Daily use and maintenance of industrial hard rapid doors

The key points for the daily use and maintenance of industrial hard rapid doors include:

Youdaoplaceholder0 1. Regularly check ‌ :

Conduct a comprehensive inspection at least once a month to ensure that all components of the door (such as the door body, track, motor, etc.) are not damaged or worn ‌.

Check the sealing strips, hinges and transmission system of the door body to ensure their flexibility and integrity ‌.

Pay special attention to whether the components such as the door frame, door curtain and torsion spring are damaged or rusty, and repair and maintain them in time ‌.

Youdaoplaceholder0 2. Cleaning and maintenance ‌ :

Regularly clean the door body and its surrounding environment to prevent dust and debris from accumulating on the door track or transmission components ‌.

Wipe the surface of the door body with a soft cloth and neutral detergent. Avoid using strongly corrosive detergents ‌.

Clean the dust and impurities in the guide rail slide, and keep the fasteners and other components of the product clean and tidy ‌.

Youdaoplaceholder0 3. Lubrication maintenance ‌ :

Regularly lubricate the moving parts of the door, especially the hinges and slide rails, to reduce friction and ensure smooth door opening and closing ‌.

Bearings should be lubricated with oil regularly. The lubrication cycle is determined by the user according to the frequency of use ‌.

Youdaoplaceholder0 4. Electrical inspection and maintenance ‌ :

Regularly inspect the electrical connections and control system to ensure that switches, sensors, etc. are functioning properly ‌.

Test all opening and closing operations and running functions to confirm that ‌ can be used normally.

Youdaoplaceholder0 5. Safety operation and emergency response ‌ :

During use, avoid hitting or leaning against the door body, and do not scratch the door curtain with sharp objects ‌.

In case of power failure, the emergency stop button should be held down. When not in use for a long time, the door should be raised to the limit position and the power supply should be disconnected ‌.

Set the deceleration cache termination process to prevent the door from hitting the door rail and ensure safety performance ‌.